CORBET'S 110 SR UL

SUPER ROCKER

CARBON ULTRA LIGHT

Get up, stand up,
for your rights

Sizes: 171 / 179 / 187 / 195

€ 700.00

Recommended Retail Price

super-rocker-ultra-light-area-of-use
4-corbets-logo

[touring-surf-powder]

DESCRIPTION

You want to tour long and far but still want to surf on top of the powder, here you go. The CORBETS is one of the kinds.

The CORBETS is a fun ski that makes you smile, an ULTRALIGHT touring ski.

With the SUPER ROCKER, it is made to turn. The short camber makes it extremely agile and versatile. It enjoys surfing and short curves and forgives any mistakes.

The long and high nose tip lets the ski arise and float and diminishes the risk to plunge into the snow and permits you to lean more forward and to stay equilibrated: NO MORE LEANING BACK. Having the gravity of your body balanced and centered helps you save a lot of energy and permits you additional reactivity.

The bottom sheet is the ISOSPORT 7510 highest standard racing.

corbet's-upper-part
corbet's-lower-part

GENERAL INFORMATION

Is a fun ski for ski-touring. When skiing balanced in an equilibria middle position you surf smoothly and relaxed having an absolute exceptional experience. Being ultra-light, the ski is shifted and displaced easily which makes it extremely energetic and interactive.

The ski is vivid and follows your movements instantaneously, maximal reactivity in the snow. Curves come easy, yet once you put some pressure on the edges it will hang on the snow hard and it will give a precise and determined control. A real versatile fun ski that you can ski without any effort.

It is made for any level of skier that wants to ski effortless in difficult and very technical terrain or just wants to pivot between the trees. A ski mutant.

– Uphill oriented [touring-elevation-fun = ELEFUN]
– Very well suited for long tours
– Mutant ski, versatile off-piste and on-piste, one for all ski, good on any snow conditions
– Extremely light, efficient in the curves, pivots easily
– Short and flat camber has less contact with the snow makes you save a lot of muscular energy
– Bottom sheet pro quality race level with 15% carbon [ISOSPORT 7500]
– High rising super nose spatula minimizing the risk to plunge into the snow
– Pro components, tail shock absorber, binding inlays, steel race edges
– Performance-flex and stiff-torsion, enhanced by vibration absorbing technology

The SUPER ROCKER has less surface that is in contact with the snow and therefore it facilitates turns and permits you to pivot. The ski in combination of the ULTRALIGHT CARBON FIBER CONSTRUCTION is extremely light and permits you to change your ski position any instant.

The carbon intensifies this featherweight ski feeling while the aramid fibers bring back the natural balance and comfortable touch. Turns come effortlessly. The short surface contact makes the ski vivid and agile. The PERFORMANCE-FLEX has been engineered to accentuate the super rocker short and flat camber; you can give maximum pressure under your foot instantly to the snow.

The ski is made for any skier who looks forward to enjoying a ski tour easier and longer.

The super rocker has an early and proportional high front rise that reduces the risk that the tip plunges in the snow, thus permitting you to ski always relaxed at midpoint.

Constructed with two layers of carbon-aramid fiber on top a paulownia wood core and underneath two layers of carbon-aramid fiber. Strengthened in the upper middle and below the foot by an additional inlet of fiberglass, two phenol plates inlayed to reinforce the screws of the bindings, an X-tape of newest carbon fiber and a ribbon of carbon-Kevlar in the tip. Manufactured where all fiber-layers, above and below, completely traverse the ski covering the sidewalls, this technic adds a lot of strength. Carbon, when mixed with aramid fiber remains extremely light but manages to absorb a high percentage of vibrations.

ogso-corbet's-layers

COMPOSITION & SPECS

Corbet’s 110 SUPER ROCKER ULTRALIGHT
Total Flat Length (cm) 171 179 187 195
Weight (kg) 1,35 1,5 1,635 1,755
Width Measures:
Front, Middle,Back (mm)
136,108,123 139,110,125 142,112,127 145,115,129
Radius Average (m) 17 19 21 24
Radius Center (m) 15 17 19 22
Nose Rise Length (mm) 340 355 370 385
Tail Length (mm) 175 185 195 205
Front Rocker Length (mm) 220 230 240 250
Back Rocker Length (mm) 220 230 240 250
Running Length (mm) 755 790 825 860
Camber Height (mm) 3 3 3 3
Nose Height (mm) 96 96 96 100
Tail Height (mm) 60 60 60 63
Middle Boot From Tail (mm) 745 780 815 850
1SMALL CUBIC TEXTURE HARD POLYAMIDE
TOPSHEET
More details

www.isosport.com

The main characteristics of polyamides are as follows:

• Resistance to aging at high temperatures and over long periods.
• High mechanical strength and high rigidity.
• Functional tenacity even at low temperatures.
• Intrinsic resistance to fire.
• Excellent dielectric properties.
• Good resistance to abrasion.
• High oxygen barrier.

2SIDE WALL ABS
ABS
More details

www.isosport.com

  • Especially designed for winter sport applications.
  • Charpy impact strength notched: +23 C°/-25C°
  • Charpy impact hardness: +23C°/-25C°
  • ISO DUR ID1000-147
3CARBON FIBER
CARBON
More details

www.saertex.com

Carbon fibers or carbon fibres are fibers about 5–10 micrometres in diameter and composed mostly of carbon atoms.
Carbon fibers have several advantages such as:
• High stiffness,
• High tensile strength,
• Low weight,
• High chemical resistance,
• High temperature tolerance and low thermal expansion.

Its main use is to serve as a reinforcement in composite materials, which makes it possible to obtain parts having good mechanical properties while being significantly lighter than metal parts.
These properties have made carbon fiber very popular in aerospace, civil engineering, military, and motorsports, along with other competition sports.

4ARAMID FIBER
ARAMIDE
More details

www.saertex.com

The main characteristics of Aramid Fiber are as follows:
• High tensile strength
• High modulus of elasticity
• Excellent vibration damping factor
• Low density
• Excellent thermal stability from -70 ° C to + 200 ° C
• Does not sustain combustion, does not melt, carbonization at 425 ° C
• Good resistance to fatigue
• Excellent dielectric properties
• Good chemical resistance to fuels, seawater but not strong acids and bases

53-AXIAL FIBERGLASS
FIBERGLASS
More details

www.saertex.com

E-glass fibre products are particularly resistant to abrasion and vibration and have excellent flexibility. The glass thread has a higher specific resistance (tensile strength/volumetric mass) than that of steel. This feature makes it possible to develop glass threads that reinforce high performance composites.
The main characteristics of Fiberglass are as follows:
• Inorganic
• Good resistance to abrasion and vibrations
• Incombustible
• Rot-resistant
• Resistant to the main chemical agents
• Excellent dielectric strength
• Excellent dimensional stability

63-AXIAL FIBERGLASS

(MIDDLE SKI POWER SHEET)

FIBERGLASS
More details

www.saertex.com

E-glass fibre products are particularly resistant to abrasion and vibration and have excellent flexibility. The glass thread has a higher specific resistance (tensile strength/volumetric mass) than that of steel. This feature makes it possible to develop glass threads that reinforce high performance composites.
The main characteristics of Fiberglass are as follows:
• Inorganic
• Good resistance to abrasion and vibrations
• Incombustible
• Rot-resistant
• Resistant to the main chemical agents
• Excellent dielectric strength
• Excellent dimensional stability

7PHENOL

(REINFORCEMENT FOR BINDING)

PHENOL
More details

www.isosport.com

Phenol ISODUR SKP is used as flank material for our skis.
In this material, the high-strength papers are impregnated with phenolic resins and compressed into sheets of durable, durable and reactive material.
This material is characterized by its excellent mechanical properties.

8CARBON FIBER+ FIBRGLASS

(TORSION STABILIZER, CROSS-BAND)

CARBON
More details

www.saertex.com

Carbon fibers or carbon fibres are fibers about 5–10 micrometres in diameter and composed mostly of carbon atoms.
Carbon fibers have several advantages such as:
• High stiffness,
• High tensile strength,
• Low weight,
• High chemical resistance,
• High temperature tolerance and low thermal expansion.

Its main use is to serve as a reinforcement in composite materials, which makes it possible to obtain parts having good mechanical properties while being significantly lighter than metal parts.
These properties have made carbon fiber very popular in aerospace, civil engineering, military, and motorsports, along with other competition sports.

FIBERGLASS
More details

www.saertex.com

E-glass fibre products are particularly resistant to abrasion and vibration and have excellent flexibility. The glass thread has a higher specific resistance (tensile strength/volumetric mass) than that of steel. This feature makes it possible to develop glass threads that reinforce high performance composites.
The main characteristics of Fiberglass are as follows:
• Inorganic
• Good resistance to abrasion and vibrations
• Incombustible
• Rot-resistant
• Resistant to the main chemical agents
• Excellent dielectric strength
• Excellent dimensional stability

9ARAMID FIBER + CARBON FIBER + BASALT FIBER

(VIBRATION REDUCER FRONT-BAND)

ARAMIDE
More details

www.saertex.com

The main characteristics of Aramid Fiber are as follows:
• High tensile strength
• High modulus of elasticity
• Excellent vibration damping factor
• Low density
• Excellent thermal stability from -70 ° C to + 200 ° C
• Does not sustain combustion, does not melt, carbonization at 425 ° C
• Good resistance to fatigue
• Excellent dielectric properties
• Good chemical resistance to fuels, seawater but not strong acids and bases

BASALT
More details

• Good tensile strength (superior to fiberglass)
• Non-toxic and inert, it produces no gas or smoke
• UV resistant, chemicals and remains sterile
• Excellent dielectric insulator
• Excellent impact resistance
• Excellent thermal and acoustic insulation
• Withstands temperatures from -260 ° C to 815 ° C

CARBON
More details

www.saertex.com

Carbon fibers or carbon fibres are fibers about 5–10 micrometres in diameter and composed mostly of carbon atoms.
Carbon fibers have several advantages such as:
• High stiffness,
• High tensile strength,
• Low weight,
• High chemical resistance,
• High temperature tolerance and low thermal expansion.

Its main use is to serve as a reinforcement in composite materials, which makes it possible to obtain parts having good mechanical properties while being significantly lighter than metal parts.
These properties have made carbon fiber very popular in aerospace, civil engineering, military, and motorsports, along with other competition sports.

10VERTCAL LAMINATED WOODCORE ULTRALIGHT PAULOWNIA
WOODCORE
More details

Paulownia is the wood of the phoenix tree. The paulownia wood is tall and straight. It is the leader among the trees.
Paulownia is one of the lightest woods. It has the unique characteristics of resistance to rot, acid and alkali.

FSC ® Label

11EDGE VULCANIZED RUBBER
RUBBER
More details

www.haberkorn.ch

Thin rubber used between the metal edge and fiberglass layers to minimize shearing-induced delamination.
Equalising temperature-related expansion and differing stress-strain coefficients.
Suitability for use over a wide temperature range.
Vibration damping up to the point of component decoupling.

12RACE EDGE STAINELESS STEEL

(RACE-EDGE STAINLESS STEEL “C67S”)

STEEL
More details

www.waelzholz.com

The steel racing edge provides smooth flex and minimal friction resistance.
The main characteristics of stainless steel are as follows:
• High durability
• Good ductility
• Optimal gliding behaviour
• Improved adhesion
• High mechanical strength
• Good workability

13ULTIMATE HARD SPEED BASE
BASESHEET
More details

www.isosport.com

• Made of premium crosslink polyethylene.
• Good abrasion resistance, very low stress level.
• Modified with wax for better gliding.

14HEEL SHOCK ABSORBER
HEEL SHOCK ABS
More details

www.injection74.com

• Especially designed for winter sport applications.
• Charpy impact strength notched: +23 C°/-25C°
• Charpy impact hardness: +23C°/-25C°
• ISO DUR ID1000-147

Certified

ADDITIONAL MATERIALS
WAX
More details

www.vola.fr

Ski wax is a material applied to the bottom of snow runners, including skis, to improve their coefficient of friction performance under varying snow conditions. The two main types of wax used on skis are glide waxes and grip waxes.

They address kinetic friction—to be minimized with a glide wax—and static friction—to be achieved with a grip wax.

Both types of wax are designed to be matched with the varying properties of snow, including crystal type and size, and moisture content of the snow surface, which vary with temperature and the temperature history of the snow.

RESIN
More details

www.sicomin.com

Bio Based resin is outcoming from the latest innovations in bio-based chemistry.
Bio Based resin is produced with a high content of carbon from plant origin.
The bio-based Carbon content of our supplier’s system is certified by an independent laboratory using Carbon 14 measurements (ASTM D6866 or XP CEN/TS 16640)
This is a significant technological advance on the following points: Clarity, colour, performances and guarantees of industrial tonnages availability.

Certified

CORBET’S 110 SR UL

DIGITAL SHEET

Share